One of the most popular methods of protecting and also improving the look of the car by Australian car owners has been ceramic coating. Ceramic coating is known to be durable, shiny and long lasting coating which makes your car look younger and does not require repeated polishing. When you think of the idea of ceramic coating in Keilor, you need to know how the process should be done in order to get to the level that is seen as professional.
The following are a few of the steps involved in the coating that can be accomplished step by step to make you see how the coating is applied and why each phase is important.
1. Thorough Exterior Wash
The vehicle should be thoroughly cleaned before any coating is done on it. This begins with high quality wash with pH-neutral shampoo to eliminate dirt, road dirt and pollution. Washing of the exterior parts, such as wheels, door jamb and trim, etc., should be done, so that nothing will later interfere with the bond between the coating.
2. Chemical Decontamination
After the first washing, the paintwork receives specialised products that dissipate the trapped particles of contaminating elements such as iron particles, tar and industrial fallout. This measure will render the surface as clean and smooth as possible.
3. Clay Bar Treatment
The remaining microscopic contaminants that cannot be removed by washing is then removed using a clay bar. This action is used to get a smooth finish and ready the paint to be corrected.
4. Paint Correction
Paint work is important, particularly in old cars. The detailer eliminates swirl marks, scratches and oxidation using machine polishers. This makes sure that the coating fixes in a perfect finish as opposed to coating flaws beneath.
5. Surface Preparation
The paint is wiped with an isopropyl alcohol solution before it is applied with a ceramic coating. This removes the polishing oils and leaves a perfect surface to the coating to stick to.
6. Applying the Ceramic Coating
Applicator Ceramic is used in little sections at a time on the ceramic coating with a microfiber applicator. The consecutive layers should be flattened and buffed, and allowed to cure. The process improves the gloss, gives the colour depth and provides a thick protective coat. In case you want the richest shine and the lasting protection, ceramic coating in Keilor provides the even coating and the best possible conditions of curing.
7. Curing and Aftercare
The coating requires curing once it has been applied. This normally implies that the vehicle should be left dry and not washed for at least 24-48 hours. The complete time of cure can be up to a week.
Also, Protect and perfect your car’s finish with this headlight cleaning guide.
Final Thoughts
The smartest investment is made by adding ceramic coating when the person is interested in high-quality protection and longevity of the shine. And in case you are also considering the possibility of using such a styling as car wrap in Keilor, you can combine both services and enhance your vehicle appearance fully and at the same time preserve your look for many years.
Follow us